• Brand: Gehl
  • Model: DL12-40
  • Condition: Used

2006 GEHL DL12-40

Location: Flora, Illinois

  • 0
Click here for financing

Details


QTY*

Seller Storefront:

Flora, Illinois

Piece of Equipment or Peace of Mind? Trust RWCI for your heavy equipment needs and you'll get both; a great v...

  • 16
Description

DL-12H40 5' forks 76" carriage AIR TIRES 95% 

At RWCI safety and reliability are of utmost importance to us. Whether you are putting someone 40’ or 135’ in the air, or lifting 6,000 LBS or 12,000 LBS - you want "Peace of Mind” on the job site, not just a "piece of equipment”.

Therefore, every unit that comes into our yard goes through a detailed technical inspection that follows a consistent, and reliable process (our "Secret Sauce”). Our technical inspection reviews up to 90 critical points relating to safety and reliability. 8% of the units that come into our yard do not pass this technical inspection and are rejected (and sent to auction).
This unit passed our technical inspection and is being sold as is with normal wear and tear for its age and hours. If you would like a quote for our 65 Point Service (see below our CERTIFIED USED SERVICE) or fresh paint, please ask.

Any unit that is given a CERTIFIED USED Service receives a 100% Buyback Guarantee, provided it is less than 10 years old. Please see our website for additional details on our Buyback Guarantee at RWCIinc. 
What is included RWCI’s CERTIFIED USED Service:

Based on our exacting standards, our trained technicians repair or replace the following: 
• Engine • Cables • Drive-train • Boom chains • Wheel hubs • Wear pads • Hydraulics • Power track • Electrical systems • Sheaves •Controls • Tires • Platform • Filters • Hoses • Perform Preventive Maintenance Service

Manufacturer Specifications
  • Manufacturer
    Gehl
  • Model
    DL12-40
  • Category
    Rough Terrain Lift Trucks
  • Classification
    Lift
  • Class
    5.0 MTons & Over
  • Type
    Telescoping Boom Rough Terrain Lift Trucks
  • Date Introduced
    01/01/1998
  • Axle Type
    Planetary
  • Drive Tires Size
    14.00 X 24-12PR
  • Steer Tire Size
    14.00 X 24-12PR
  • Boom Type
    3-Section
  • Maximum Lift Height
    484.0 in
  • Maximum Reach
    316.0 in
  • Parking Brake
    Hydraulic
  • Service Brakes
    Wet Disc
  • Aspiration Type
    Turbocharged
  • Cooling (Air/Liquid)
    Liquid
  • Cylinders
    4.0
  • Emissions Tier
    Tier 3
  • Engine Manufacturer
    John Deere
  • Engine Model
    4045T
  • Horsepower
    115.0
  • Power Mode
    Diesel
  • Rated RPM
    2500.0
  • Fuel Tank
    30.0 gal
  • Hydraulic System Reservoir
    45.0 gal
  • Hydraulic Pump Type
    Open-Center
  • Maximum System Pressure
    3000.0 psi
  • Operator Protection
    ROPS/FOPS
  • Base Capacity
    12000.0 lbs
  • Load Center
    24.0 in
  • Max Fork Height Rated Capacity
    10,000
  • Steering
    2W/4W/Crab
  • Drive System
    4WD
  • Maximum Travel Speed
    22.8 mph
  • Number of Speeds
    4F/4R
  • Speed (F/R) 4th Gear
    22.8
  • Transmission
    Powershift
  • Boom Reach Below Grade
    16.0 in
  • Fork Size (W x L)
    2.25 X 4 X 48
  • Ground Clearance
    16.0 in
  • Maximum Boom Angle
    70.0 degrees
  • Operating Weight
    25300.0 lbs
  • Outside Turn Radius
    146.0 in
  • Overall Height
    95.0 in
  • Overall Length
    232.0 in
  • Overall Width
    99.0 in
  • Wheelbase
    128.0 in
Powered by:

Taxes, Shipping, & Policies
Taxes

TAXES ARE NOT CHARGED ON CHECKOUT AND MAY BE COLLECTED POST-SALE DEPENDING ON YOUR STATE. For the 12 States of AL (4%), AZ (5.6%), CT (6.35%), IA (6%), IL (6.25%), MN (6.88%), NJ (6.625%), OK (4.5%), PA (6%), RI (7%), SD (4.5%), and WA (6.5%), Gearflow Inc is required to collect and remit States sales tax for non-tax-exempt buyers. If you are a tax-exempt buyer, please send your current State certificate to info@gearflow.com. If you do not reside in one of those 12 States, then tax will be collected only if the Seller collects taxes for your State (usually only for the Seller’s nexus State).

Shipping

PLEASE EMAIL US FOR A FREIGHT QUOTE TO YOUR ADDRESS: ship@gearflow.com. We work with vetted 3PL companies who regularly move equipment, and will reply asap! We will invoice you for the freight charge separately from the product purchase.

Refunds, Exchanges, & Warranty

Gearflow.com offers a standard 3 business day buyback guarantee on all heavy equipment.

Additional Policies & FAQs

Last updated 03-25-2019