• Brand: IHI
  • Model: 35VX
  • Condition: Used

2010 IHI 35VX

Location: Flora, Illinois

  • 0
Click here for financing

Details


QTY*

Seller Storefront:

Flora, Illinois

Piece of Equipment or Peace of Mind? Trust RWCI for your heavy equipment needs and you'll get both; a great v...

  • 16
Description

35VX rubber trax 65% Yanmar eng, blade, 18" qa bucket, 7500 # - JUST SERVICED

At RWCI safety and reliability are of utmost importance to us. Whether you are putting someone 40’ or 135’ in the air, or lifting 6,000 LBS or 12,000 LBS - you want "Peace of Mind” on the job site, not just a "piece of equipment”.

Therefore, every unit that comes into our yard goes through a detailed technical inspection that follows a consistent, and reliable process (our "Secret Sauce”). Our technical inspection reviews up to 90 critical points relating to safety and reliability. 8% of the units that come into our yard do not pass this technical inspection and are rejected (and sent to auction).

This unit passed our technical inspection and is being sold as is with normal wear and tear for its age and hours. If you would like a quote for our 65 Point Service (see below our 65 POINT SERVICE) or fresh paint, please ask.

Any unit that is given a 65 Point Service receives a 100% Buyback Guarantee, provided it is less than 10 years old. Please see our website for additional details on our Buyback Guarantee at

What is included RWCI’s 65 Point Service:
Based on our exacting standards, our trained technicians repair or replace the following: 
• Engine • Cables • Drive-train • Boom chains • Wheel hubs • Wear pads • Hydraulics • Power track • Electrical systems • Sheaves •Controls • Tires • Platform • Filters • Hoses • Perform Preventive Maintenance Service

Manufacturer Specifications
  • Manufacturer
    IHI
  • Model
    35VX
  • Category
    Excavators
  • Classification
    Construction
  • Class
    3.1 - 4.0 MTons
  • Type
    Crawler Mounted Compact Excavators
  • Date Introduced
    01/01/2007
  • Date Discontinued
    12/31/2013
  • Boom Type
    1-Piece
  • Bucket Capacity - Heaped
    3.9 cu ft
  • Bucket Digging Force-Standard
    7688.0 lbs
  • Bucket Width
    24.0 in
  • Swing Angle - Left
    50.0 degrees
  • Swing Angle - Right
    90.0 degrees
  • Cylinders
    3.0
  • Emissions Tier
    Tier 4 Interim
  • Engine
    3TNV88
  • Engine Manufacturer
    Yanmar
  • Net Horsepower
    27.6 hp
  • Power Mode
    Diesel
  • Rated RPM
    2300.0
  • Fuel Tank Capacity
    9.2 gal
  • Auxiliary Circuit Flow
    16.6 gal/min
  • Hydraulic Pumps - Type
    Piston/Gear
  • Main Pump - Maximum Flow
    27.7 gal/min
  • Main Relief Pressure
    3000.0 psi
  • Operator Protection
    ROPS
  • Maximum Swing Speed
    8.8 rpm
  • Travel Speed - High
    3.0 mph
  • Travel Speed - Low
    1.7 mph
  • Ground Pressure
    4.2 psi
  • Track Length
    87.0 in
  • Track Shoe Type
    Rubber
  • Track Shoe Width
    12.0 in
  • Blade-Lift Above Ground Level
    14.6 in
  • Blade-Maximum Cutting Depth
    15.0 in
  • Blade Size (Height X Width)
    1'2" X 5'0"
  • Maximum Digging Depth
    136.0 in
  • Maximum Digging Height
    194.0 in
  • Maximum Dumping Height
    133.0 in
  • Maximum Reach
    213.0 in
  • Operating Weight
    3.4 mt
  • Overall Height
    97.0 in
  • Overall Length
    180.0 in
  • Overall Width
    71.0 in
  • Undercarriage Ground Clearance
    14.0 in
  • Upperstruct. Ground Clearance
    22.0 in
Powered by:

Taxes, Shipping, & Policies
Taxes

TAXES ARE NOT CHARGED ON CHECKOUT AND MAY BE COLLECTED POST-SALE DEPENDING ON YOUR STATE. For the 12 States of AL (4%), AZ (5.6%), CT (6.35%), IA (6%), IL (6.25%), MN (6.88%), NJ (6.625%), OK (4.5%), PA (6%), RI (7%), SD (4.5%), and WA (6.5%), Gearflow Inc is required to collect and remit States sales tax for non-tax-exempt buyers. If you are a tax-exempt buyer, please send your current State certificate to info@gearflow.com. If you do not reside in one of those 12 States, then tax will be collected only if the Seller collects taxes for your State (usually only for the Seller’s nexus State).

Shipping

PLEASE EMAIL US FOR A FREIGHT QUOTE TO YOUR ADDRESS: ship@gearflow.com. We work with vetted 3PL companies who regularly move equipment, and will reply asap! We will invoice you for the freight charge separately from the product purchase.

Refunds, Exchanges, & Warranty

Gearflow.com offers a standard 3 business day buyback guarantee on all heavy equipment.

Additional Policies & FAQs

Last updated 03-25-2019